Product Information
How To Use
Technical Datasheet
Industries Used
Rust Resistance
Bonding Strength
Replacement Of Phosphating

How To Use
To know how to apply Steel Guard Nanocoat™, please read the following:
  • “Steel Guard Nanocoat™” can be applied by brushing, spraying, dipping or any other method.

  • The surface to be applied should be cleaned and free from any rust, dust, dirt, grease, oil & old paints. Heavy rusted portions should be rubbed with a wire brush to remove the flaky, scaly loose rust and then wiped off before applying.

  • “Steel Guard Nanocoat™” should be applied, preferably between the temperature range of 5º C – 45º C and relative humidity of 40% – 95 %, for excellent results.

  • When “Steel Guard Nanocoat™” is applied on the rusted surface , the color gradually changes to dark blue / black with white spots (because of rust) indicating that the chemical reaction has taken place .The white portion can then be wiped & washed off with water and kept to dry.

  • The usual drying time for “Steel Guard Nanocoat™” is 30 minutes under normal weather condition which then needs to be kept in open for 24 hrs to completely cure & make it rust proof. However, the drying can be reduced by using blower fans, heat lamps, etc.

  • Always pour / unload Steel Guard chemical only in a PVC / Plastic container and not in any other metallic container.

  • Always wear Hand Gloves, Eye Goggles while using Steel Guard.

   Disclaimer   |   Privacy Policy